| MARTIN T90 4-zijdige schaaf en profileersautomaat met 7 schaafassen, NC gestuurde hoogte en breedte verstelling |
|
|
| Spezifikationen: |
|
| Manufacturer: |
MARTIN |
| Type: |
T90 Profil with 7 spindels |
| Year: |
2022 A1 rebuild and to be sprayed |
| M-Nr.: |
V215410 |
|
|
| Infeed table: |
2000 mm + 1.000 mm extension\ |
| Infeed tabel height adjustment: |
Max. planing thickness 10 mm |
| Infeed fence: |
Max. planing thickness 10 mm |
| Planing width: |
12 – 240 mm (260 mm possible when using axial hollowed tools) |
| Planing thickness: |
8 – 170 mm |
| Planing spindle: |
Spindele 1 – horizontal max. 12 mm, 240 mm nett working width, tooldiam. Min. ø100 mm – max Ø125m ø100- max. ø125 mm |
| Planing- / Contour spindels: |
Spindels 2 & 3: Vertical spindels max. 12 mm, working height max. 170 mm, tooldiam. min. ø125 mm ø125 mm |
| Profiling spindels: |
Spindle 4: Horizontal spindel max. 8.5 mm, working width 240 mm, tooldiam. Min. 100 mm – max. Ø125 mm |
| . |
5. Top: Profiling spindel ø40 mm, working width 240 mm, setting 64 mm radial, – 40 mm axial, tooldiam. Min. Ø100 – max. ø180 mm ø100- max. . |
| . |
6. Right; Vertical profiling spindel, ø40 mm, working height 170 mm, tooldiam. min. 100mm – max 180 mm |
| UNIVERSEEL-as |
7. UNI: 90° tuning profiling spindel, ø40 mm, working length 240 mm, tooldiam. Ø100 – max. ø180 mm ø100- max. ø180 mm |
| Thickness setting: |
NC control programmable or manual electric setting with digital display |
| Planing width: |
NC control programmable or manual electric setting with digital display |
| Programms: |
100 Programs storage |
| Cutterheads: |
1. Bottom: Z-4, ø125 mm, 6.000 rpm |
|
2. Right: Z-4, diam. ø125 mm, 6.000 rpm |
|
3. Left: Z-4, diam. ø125 mm, 6.000 rpm |
|
4. Top: Z-4, diam. ø125 mm, 6.000 rpm |
|
5. Top 2: Profiling spindel shaft: ø40 mm |
|
6. Right 2: Vertical profiling spindel shaft: ø40 mm |
|
7. UNI spindel: 90° turning; vertical – horizontal, top – bottom shaft: 40 mm |
| Min. product length: |
380 mm (460mm when profiling) |
| Central control: |
NC- Control with LCD display |
| Greasing: |
Automatic table surface greasing |
| Spindel power: |
1. Bottom 7.5 KW |
|
2&3. Right & Left: 7.5 kW |
|
4. Top 7,5 kW |
|
5. Top 2: 7.5 kW |
|
6. Right 2: 7.5 KW |
|
7. UNI 7.5 kW |
| Feed Speed: |
4 – 25 m/min stepless setting |
|
Steel and rubber coated rolls; 1. Infeed roller with elektro-pneumatically 2-point positioning |
|
Pneumatische drukinstelling verdeelt in groepen |
|
|
| Central greasing: |
Central greasing |
| Conformity: |
CE |
|
|
| Condition: |
Fully functional |
+31(0)547-870020
